Home/Catalogue

Every product, one list.

205 catalogued SKUs and 24 featured systems from ProfilGate, Shishido, HexStat, Vessel, Trek and Ace Star's own range. Search by code, name or spec, then add items to a single enquiry list.

205SKUs

45Product lines

7Families

/

Clean Factory Entry

Stop dirt at the door — wheel, sole and trolley decontamination.

Clean Factory Entry · 2 models

ProfilGate dry cleaning grates

German heavy-duty grates, rated to 30 tonnes. Angled brushes strip dirt from forklift tyres, pallet-jack wheels, trolley castors and soles into stainless collection bins.

ProfilGate iProfilGate sti

Dirt transportation from forklift tires, pallet jack wheels or trolley castors into sensible areas is very often underestimated. First of all the entrance zones will be contaminated and following like vehicles, pallet jacks or trolleys will then spread the dirt further into the production areas. With ProfilGate cleaning grates, dust contamination problems can be eliminated directly at the entrance zones.

ProfilGate is made of heavy duty grates that can withstand load of up to 30 tons ! It is designed with brushes placed inside stainless-steel bins, which collect the brushed off dirt. The particular angle of the special brushes automatically clean all kind of tire treads mechanically when crossing the grates.

Clean Factory Entry · 3 models

ProfilGate Aqua & DryZone

Wet cleaning and disinfection of wheels and soles in a stainless tray, then DryZone grates remove the excess water.

i aquasti aquaDryZone

ProfilGate Aqua Consist of Stainless Steel Tray, Separated Grates With Brush and Drainage Connector

ProfilGate Aqua is most suitable for Food Industry (dairies, sweets, meat products), Chemical Industry and Pharmaceutical Industry that have both cleanliness and hygiene requirements.

Clean Factory Entry · 1 models

Portable ProfilGate P45 Aqua

Portable tray with quick setup. A patented brush system carries disinfection liquid onto shoe soles and trolley wheels.

sti P45 aqua

ProfilGate sti P45 aqua is a quick and convenient setup for shoes or trolley wheels disinfection to prevent spread of contagious disease in work environment.

This is a portable disinfection system to disinfect Shoes Soles and Trolley Wheels. It comes with a tray to contain disinfection liquid. Within the tray, there are patented brush system to bring the disinfection liquid (through capillary effect) to the surface of soles and wheels. As users and Trolleys move on ProfilGate sti P45 aqua, the brush system will brush and disinfect shoes soles and wheels.

Clean Factory Entry · 2 models

StepGate sole sanitising

Stainless StepGate units clean and sanitise shoe soles at the threshold. Available with a dry pad.

StepGate IStepGate II (dry pad)

Clean Factory Entry · 1 models

SlimDust washable sticky mat

RoHS-compliant urethane/PET (10⁸ Ω, ESD-safe). Lifts dirt in 3 footfalls or 3 wheel rotations; wash it with water and reuse it.

SlimDust

SlimDust Mat is a low-cost washable sticky mat for effective removal of dirt and fine dust from shoe soles, trolley castors, AGV (Automated Guided Vehicle) wheels and pallet jack wheels. It can be wash and re-use with a general life span of about one year.

SlimDust Mat is made of Urethane and PET materials that are RoHS compliant and ESD safe with surface resistance of 10⁸ ohms. This made SlimDust Mat particularly suitable for dirt removal in Clean Room and Electronics Manufacturing environment.

Clean Factory Entry · 3 models

SWC shoe-sole cleaning machines

Stainless SWC-600, 1100 and 1700 machines start when you step on. A rolling brush scrubs side to side and front to back, then a K-sponge pad dries the sole.

SWC-600SWC-1100SWC-1700

SWC Series machine cleans shoes bottom sole using mechanical wet scrubbing method. Made of stainless steel body frame with unique and high quality brushing mechanism, the machine is specially designed to effectively clean shoes before entering to clean room environment. Specially formulated low foaming cleaning chemical is available from us as options to further enhance shoes cleaning effectiveness.

SWC series machine is designed to prevent turbulence flow of water in the washing tank thus eliminating spillage of cleaning water from machine. Customer has the option to use our specially formulated low foaming cleaning chemicals that will not cause excessive foaming during shoes cleaning process.

Clean Factory Entry · 5 models

Vacuum floor mat

Shoes bring in about 80% of indoor micro-dust. This mat pulls it out at the air shower, the flap gate or the office door. Sizes from 700×800 to 800×2100 mm.

700×800600×1100800×11001100×1100800×2100 mm

Statistics shows that the shoes bring 80% of total micro-dust, harmful substances and germs into the indoor environment. Our Vacuum Floor Mat fundamentally improve the quality of air by minimizing micro-dust, harmful substances and germs at the entrances of a building and indoor environment.

700 x 800 mm, 600 x 1100 mm, 800 x 1100 mm, 1100 x 1100 mm, 800 x 2100 mm

ESD Flooring

Conductive and static-dissipative floors — supplied, installed, repaired.

ESD Flooring · 9 models

Conductive & static-dissipative tiles

Supply and installation of HexStat (Ace Star is the representative) and ESDWork conductive and static-dissipative tiles, vinyl sheet and roll.

HexStatESDWorkAS-1101AS-1102AS-1103AS-3001AS-3007AS-3008AS-3009

Ace Star is also supplier of ESDWork Conductive Tiles and Static Dissipative Tiles. Our Conductive Tiles , Static Dissipative Tiles is by far the most practical choice of ESD Control Flooring. Please feel free to contact us for benefits of our tiles as follows :

Ease Of Tiles Maintenance (shinny surface achievable with just normal cleaning and buffing)

ESD Flooring · 1 models

ESD epoxy floor coating

For protected areas with forklift and pallet-jack traffic. Copper-tape network, carbon layer and ESD epoxy top coat, compliant with ESD S20.20.

S20.20-compliant

For ESD Protected Area with frequent heavy duty traffics such as pallet jack or forklift, ESD Epoxy Floor Coating is the right flooring choice. The benefits of ESD Epoxy Flooring Coating is high physical strength as well as good resistant to chemicals.

Our ESD Epoxy Floor Coating is compliant to ESD S20.20 with the following specifications :

ESD Flooring · 6 SKUs

Floor finishes, raised floors & accessories

Raised access floor panels, welding rod, copper tape and conductive glue, plus dissipative finishes, strippers, cleaners and restorers.

FL-005

Static Dissipative Floor Finish - General Purpose

More economical, dries faster and with higher gloss intensity than other leading ESD floor finishes.
Provides superior abrasion performance that lasts up to 18 months with no buffing required
Surface Resistivity: 10⁸ - 10⁹ ohms/square

FL-007

Anti-static Floor Stripper

This stripper will not damage or dull flooring when used according to manufacturer's directions
Non-streaking and low foaming
Effective in hard or soft water

FL-008

Anti-static Neutral Cleaner

A highly concentrated biodegradable, anti-static cleaner for use in all facilities
Leaves no film, low foam level, constant detergency, non-streaking and safe to septic and sewage systems
Will not degrade production environment anti-static properties

FL-009

Static Dissipative Restorer / Cleaner

Surface Resistivity: 10⁷ - 10⁹ ohms/square

FL-010

Static Dissipative Floor Coating

High performance water-based formula dissipates static discharge on concrete and other unfinished hard floor surfaces
Resist yellowing, colour fading and is biodegradable
Surface Resistivity: 10⁵ - 10⁸ ohms/square

FL-013

Staticide Acrylic

Competitively priced
Easily maintained and repaired with no buffing
Contains low volatile organic compounds (V.O.C.s)

Ionizers & Test Equipment

Shishido ionizers, field meters and ESD testers that prove control.

Ionizers & Test Equipment · 12 models

Shishido WINSTAT fan ionizers

AC, DC and HDC-AC fan ionizers from Japan, from compact desktop units to 3-fan overhead and extra-wide LCD-line models. Offset voltage from < 5 V.

BF-XZBBF-SZAIIBF-X2ZB-V2BF-X2DD-V2BF-XMBBF-X2MBBF-2ZCBF-X4ZBBF-X4MBBF-6MBBF-OHP3BBF-80/120/160

Shishido AC Ionizer is cost competitive. It requires very minimum maintenance service and has very stable and good performance.

Shishido DC Ionizer generates good balance ions for fast static elimination. Standard cleaning interval approximately 6 months under non-stop continuous operation environment.

Ionizers & Test Equipment · 4 models

Shishido ZappII nozzle & AGZIII air gun

Compact AC nozzle ionizer with a built-in piezoelectric transformer and no high-voltage wiring. The ZappII-H delivers up to 350 L/min at 0.5 MPa.

ZappIIZappII-HZappII-LAGZIII

With ZapII, static elimination at the display and base of a cellular phone, can now be achieved under low offset voltage control at any time.

Detachable emitter pin specially designed for easy maintenance and service.

Ionizers & Test Equipment · 1 models

Shishido CABX bar ionizer

HDC-AC bar ionizer for stable, long-term static elimination, in several bar lengths and emitter-pin materials.

CABX

CABX bar type ionizer is powered by Shishido's state of the art HDC-AC technology that provides stable and long-term static elimination capabilities. Shishido has been consistent in designing ionizer that does not require cleaning over very long period of time.

8) Different Emitter pin materials to meet various customer requirements

Ionizers & Test Equipment · 2 models

Statiron DZ4 field meter & DP plate monitor

Field meter with a rotating sensor head for ESD audits, plus a handheld charged plate monitor that checks ionizer offset voltage and decay time.

Statiron DZ4Statiron DP

With all integrated functions to check the offset voltage (ion balance) and decay time of ionizers.

Its internal charging circuit can set the charged plate to 1,000V and automatically measures decay time (from 1,000V to 100V).

Statiron DZ4 field meter & DP plate monitor

Ionizers & Test Equipment · 2 models

Static Honestmeter H-0110-S4

Measures charge attenuation to ISO 18080-1. The V2-S1 data analyzer calculates decay half-life automatically.

H-0110-S4V2-S1

Static Honestmeter is an Electric Charge Attenuation Measuring Instrument compliant to ISO Standard ISO/WD 18080-1. If you have requirement for instrument to test your product per ISO 18080-1 standard, then our Static Honestmeter model H-0110-S4 is the perfect solution for you.

The Honest Data Analyzing System V2-S1 is a datalogging and analyzing device designed to automatically calculate half life of the voltage decay from the static decay characteristic curve obtained from Static Honestmeter instrument. The static electricity attenuation of materials can be automatically measured by a simple “one-click” operation with Honest Data Analyzing System V2-S1.

Ionizers & Test Equipment · 4 models

Trek electrostatic voltmeters

Trek 520 (±2 kV) and 523 (±20 kV) measure surface voltage without contact. The 876 adds an extended probe.

Trek 520-1Trek 520-2Trek 523Trek 876

Measurement Accuracy: Better than ±5% of full scale over the recommended probe-to-surface spacing

Trek 520 is available in two versions. The 520-1 has a digital meter to display the measured voltage. The Trek 520-2 has an analog output monitor in addition to the digital display. This analog output monitor can be used to record the measured voltage or to view it on an oscilloscope.

Ionizers & Test Equipment · 4 models

iDS-600 turnstile & flap-gate ESD tester

Designed and built by Ace Star. It tests left shoe, right shoe and wrist strap (100 kΩ to 120 MΩ) before the gate opens, with data logging and optional face recognition.

iDS-600TurnstileFlap gateFace recognition + thermal

With the latest requirement to check workers' body temperature before entering manufacturing production floor or offices, our ESD Turnstile or Flap Gate can now be upgraded with facial recognition and body temperature thermal scanning capability.

We design and build our own ESD Shoes / Wrist Strap Tester with Access Control such as Turnstile , Flap Gate, Magnetic Door Lock , Infra Red Sensor and etc. Because we build our own tester and access control system, we could customize our product (both hardware and software) to meet your specific requirement on ESD testing and access control.

iDS-600 turnstile & flap-gate ESD tester

Ionizers & Test Equipment · 1 models

Desco body voltage meter

Portable human-body-voltage walking test to ANSI/ESD STM97.2, now mandatory for ESD floor qualification under S20.20-2014.

Desco · STM97.2

With the latest revision S20.20-2014 it is now mandatory to test Human Body Voltage (STM97.2) for ESD Flooring Qualification (refer Table 2 of S20.20-2014). We are glad to introduce the most cost effective and user friendly solution for this application, a Handheld Human Body Voltage Tester from Desco USA.

Ionizers & Test Equipment · 1 models

AGB dry box with glove

Low-humidity glove box that drops RH quickly, so ESD material tests give accurate results.

AGB series

Simply place your material under test together with your test instruments inside AGB Dry Box and then set the required humidity at control panel of AGB Dry Box. You will be impressed by the rapid drop of humidity inside AGB Dry Box to reach low humidity environment required for your ESD test application. Feel free to contact us for more information about AGB series Dry Box With Glove.

Ionizers & Test Equipment · 6 SKUs

Cleanroom equipment

Cleanroom vacuums, chamber vacuum sealers, dry cabinets, air showers, garment storage cabinets and clean booths.

CR-054

Vacuum Cleaner

Cleanroom Class 10 -100 compatible
HEPA filter can remove 99.97 - 99.99% of 0.3m particles
Filter material: Paper, Polyester, HEPA

CR-055

Chamber Vacuum Sealers

Clean room compatible stainless steel chamber
Automatic or adjustable timer, vacuum gauge with transparent lid
Ideal for packing of Trays, Tape & Reels and Shipping Tubes

CR-056

Dry Cabinet / Dehumidify Cabinet / Humidity Cabinet

Provide continuous humidity controlled environment for the storage of sensitive devices
Humidity controlled range <=5%, <=10%,<=15% or <=25% - 55% RH
Customised size & accessories available

CR-057

Air Shower

Blow off surface lint, dust and other contaminants
Self-contained unit that recycles the air through a Filter Unit

CR-058

Garment Storage Cabinet

Provide Systematic Storage of clean garments
Cleanroom Class 100 to 100K compatible
Customised size & design available

CR-070

Clean Booth

Aluminium structure with HEPA filters to achieve clean work area
Cleanroom Class 100 to 100K compatible
Customised size & design available

Ionizers & Test Equipment · 27 SKUs

ESD test & monitoring equipment

Resistance meters, wrist-strap and footwear testers, static locators, charge plate monitors, continuous monitors, ionizers and bag test systems.

EQ-002

Surface Resistivity Checker

Handheld meter
Checks surface resistivity and resistance to the ground
The checker, with two brass bars, employs the ASTM Standard 0-257 method of parallel bar sensing

EQ-003

Wrist Strap & Footwear Combo Tester

Tests, prints, stores, and e-mails each wrist strap and heel grounder resistivity value in less than 3 seconds

EQ-004

Surface Resistance Meter

This durable and lightweight handheld meter measures both Surface Resistivity between two points (Rtt) and Resistance to Ground (Rtg)
Test Range 10⁵ to 10¹²
Automatically generates a 10v or 100v test voltage for a 9 volt battery with results shown through a mutli-colored LED display

EQ-005

Digital Resistance Meter Set

Includes resistance meter, one pair 51b electrodes, cable accessories and moulded carrying case

EQ-007

Digital Static Locator

Locate and measure static charge potentials on product, people, equipment and packaging

EQ-010

Handheld Charged Plate Monitor (Without Timer)

EQ-013

Charge Plate Monitor

Four test modes with flexible parameter setting
Can be set to trigger alarm when a test is failed
Internal memory to store test data for later viewing purposes

EQ-014

Charge Plate Monitor (optional with Computer Interface)

Decay & float modes
Detachable charge plate with flexible, small diameter cable
Various charge plate size available

EQ-016

Static Shielding Bag Test System

Designed to perform ESD STM11.31 & EIA-541 testing when used in conjunction with a high speed oscilloscope and computer

EQ-017

Static Decay Meter

Meets the requirements for static charge dissipation and static decay rate testing as required by DOD, NFPA, ESDA, INDA and EIA test specs

EQ-019

Workstation Monitor Checker

Verify proper operation of dual wrist strap, workstation, and ground monitor
Simulates the proper resistances and signals to check for the correct responses

EQ-020

Ground Pro

Impedance Measurement
Voltage Measurement
EMI Measurement

EQ-021(1)

Ground Master®

Comprehensive tool ground monitor
ANSI/ESDA S20.20 compliant
Ground impedance alarm range: 1 ... 20 Ohms

EQ-023

Ground Man & Ground Man Plus

Process tools in semiconductor, disk drive, flat panel and EMS environment
Reasonably-priced ground monitor with 3 monitor point for metal ground within the tool
ANSI 6.1/ ESDA S.20.20 compliant

EQ-024

Iron Man & Iron Man Plus

Connects to ground plane or any grounded part of PCB or product in process
Bipolar over voltage circuit
Voltage range 0 . .. 5 and 0 ... 50V

EQ-025

Continuous Wrist Strap Monitoring System

Ensure wrist strap in good working condition
Light weight and effective

EQ-026

WS Aware - Dual Workstation Monitor

Dual wrist strap monitor
Field replacable (patent-pending) wrist strap terminals
Extremely low on-operator voltage (25 millivolts)

EQ-027

Equilibrium Ionizer Controller

Monitors DC, AC and pulsed ionizers
Controls with virtually all DC ionizers that are equipped with a control input
Automatically adjusts to ionizer parameters for control

EQ-028

EM Aware Continuous ESD Monitoring

ESD Events: Magnitude and count
Broad sensitivity range. Adjustable sensitivity
Audio and visual indication. Stand alone or networked

EQ-030

Humidity Controlled Chamber / Dry Box wtih Glove / Glove Dry Box

250 L work space
clear transparent acrylic walls
Isolated glove access opening

EQ-031

Single Fan Ionizer

Compact and light weight with adjustable angle
Ion balance is very steady with adjustable setting

EQ-032

Overhead Ionizer (2 fans & 3 fans)

Large ionization area
Air flow speed is adjustable

EQ-033

Ionizer - Air Gun

Ergonomically designed ionizing air gun has superb static elimination and dust removal capability
Lightweight and heavy-duty features

EQ-034

Ionizer - Air Snake

A nozzle that could be flexibly bent at will
Compress air and ionization power is simultaneously triggered by foot pedal
With built-in voltage regulator, ion balance is Maintained effectively

EQ-035

Ionizer - Bar

Internal air amplifying ducting built with a tough structure

EQ-036

Ionizer - Ionizing Air Nozzle

Neutralizes static charges effectively
Voltage fluctuates slightly at low voltage, no damage to objects when used at closed distance
Designed with internal compact transformer, without high voltage cable to prevent electrical hazard

EQ-050

Digital Thermometer

Measures tips temperature quickly and accurately with CA sensor(Dia 0.2mm)
Sensor with special metal alloy coating resists corrosion and oxidation
Range 0-600C

Cleanroom Consumables

Garments, gloves, footwear, wipes and swabs for controlled environments.

Cleanroom Consumables · 1 models

3-ply face mask, BFE > 95%

Model CLN-FMASK-18: a disposable 3-ply mask with a melt-blown filter layer and over 95% bacterial filtration efficiency.

CLN-FMASK-18

This is not just any face mask; it is face mask with 95% BFE that can really protect user againts contagious diseases.

Ace Star is introducing new disposable 3-ply face mask model CLN-FMASK-18 designed with Bacteria Filtration Efficiency (BFE) of more than 95%. Is inner layer is soft and comfortable. The middle layer is a melt-blown high efficiency filtration microfiber fabric. Outer layer provides further enhanced protection through water resistant and anti-stick non-woven material.

Cleanroom Consumables · 4 SKUs

Cleanroom & ESD garments

Jumpsuits, 2-piece suits, smocks and head covers. Smocks, jackets, jumpsuits and swing bags can be tailor-made.

CR-001

Jumpsuit

One-piece suit for Class 1k & below environment
Cleanroom fabric with antistatic properties
Lightweight and breathable

CR-002

2-piece Suit

Jacket and pants suit
Cleanroom fabric with antistatic properties
Lightweight and breathable

CR-003

Smock

For general clean area use
Cleanroom fabric with antistatic properties
Lightweight and breathable

CR-004

Cap & Head Cover

Customised design
Cleanroom fabric with antistatic properties
Lightweight and breathable

Cleanroom Consumables · 5 models

PU-coated nylon gloves

Carbon ESD and white nylon gloves, uncoated, fingertip-coated or palm-coated. Breathable, flexible, with a fitted elastic cuff.

AS-PUGCN-NCAS-PUGCN-FCAS-PUGCN-PCAS-PUGWN-NCAS-PUGWN-PC

Ergonomic and Anti-fatique due to its Breathable, flexible and soft nylon texture

Elastic cuff allows users to wear PU Coated Nylon Glove in top fit condition (avoid “loose-wearing” gloves problem)

Cleanroom Consumables · 18 SKUs

Cleanroom & ESD gloves

Vinyl, latex, nitrile, polyester, conductive, nylon, cotton, leather and high-temperature gloves.

CR-043(5)

High Temperature Gloves

White, long gloves
Cleanroom Compatible
Withstand high temperature 200C or 300C

CR-043(3)

High Temperature Gloves

Coloured, short gloves
Cleanroom Compatible
Withstand high temperature 200C or 300C

CR-043(1)

Cleanroom Heat Resistance

Cleanroom compatible
Heat Resistance & ESD Safe
Available in 150C & 300C range

CR-032

Vinyl Gloves

Low extractable ions
Superior Chemical Resistance
Packed in Class 10 to 10K

CR-033

Latex Gloves

Amide & Silicon free, low extractable ions
Made of 100% natural rubber with or without Finger textured
Cleanroom Class 100, 10K compatible

CR-034

Nitrile Gloves

Amide & Silicon free , low extractable ions
Strong Synthetic Rubber with or without Finger textured
Cleanroom Class 100, 10K compatible

CR-035

Polyester Gloves

Low cost
100% Polyester
Lint-free and Durable

CR-036

Conductive Polyester Gloves

100% Polyester with Conductive Carbon Fiber
Surface Resistivity 10⁹ - 10¹¹ ohms/sq
Lint-free and Durable

CR-037

Conductive Non-Skid Polyester Gloves

PU based coating on Palm side
Prevent slipping when handling products
Lint-free and Durable

CR-038

PU Coated Polyester Gloves

Full PU coating on Palm side
Non-slip Palm provide excellent grip
Heat and Abrasion Resistance

CR-039

Nylon Gloves

Provides excellent Stretch & Comfort at competitive price
Use in General Clean Environment
Low lint

CR-040

Nylon Top-Fit Gloves

Excellent Stretch and Comfort
PU coated finger

CR-041

Nylon PU Palm Coated Gloves

Stretchable and Comfortable
PU coated palm
Lint free & Anti-slip

CR-042

ESD Nylon PU Finger Coated Gloves

Provides excellent Stretch & Comfort
Low lint
Available in Normal or ESD safe Material

CR-044

Cotton Gloves - Thin

Light and Comfortable
Low cost
Customised Grade available

CR-045

Cotton Gloves - Thick

Strong and Durable
Double knitted for robust use
Customised Grade available

CR-046

Full Leather Gloves

Made of genuine leather
Strong and Durable
High abrasion resistance

CR-047

Half Leather Gloves

Cotton or Polyester top surface
Strong and Durable
High abrasion resistance

Cleanroom Consumables · 18 SKUs

Cleanroom & ESD footwear

Booties, safety booties, PU/PVC ESD shoes, safety shoes, slippers and canvas shoes, in dissipative (10⁶–10⁹ Ω) and conductive (10⁵–10⁷ Ω) grades.

CR-005

Cleanroom Booties

Excellent dust control
Fabric Surface Resistivity 10⁶ to 10⁹ ohms/sq
PU or PVC sole

CR-006

Soft Sole Booties

Excellent dust control
Fabric Surface Resistivity 10⁶ to 10⁹ ohms/sq
PU or PVC sole

CR-007

Safety Booties

Excellent dust control
Fabric Surface Resistivity 10⁶ to 10⁹ ohms/sq
PU sole with safety cap

CR-008(1)

Static Control PU/PVC Shoes

4-hole design, white
PU or PVC sole
Static Dissipative: 10⁶ - 10⁹

CR-008(2)

Static Control PU/PVC Shoes

4-hole design, black
PU or PVC sole
Static Dissipative: 10⁶ - 10⁹

CR-008(3)

Static Control PU/PVC Shoes

Full cover , white
PU or PVC sole
Static Dissipative: 10⁶ - 10⁹

CR-008(4)

Static Control PU/PVC Shoes

Net with Velcro, grey sole
PU or PVC sole
Static Dissipative: 10⁶ - 10⁹

CR-009(1)

Static Control PU/PVC Shoes

Net with velcro, white
PU or PVC sole
Static Dissipative: 10⁶ - 10⁹

CR-008(5)

Static Control PU/PVC Shoes

Net design
PU or PVC sole
Static Dissipative: 10⁶ - 10⁹

CR-010(1)

ESD Safety Shoes

Slip-on design, white
Static Dissipative or Conductive Sole
PVC or PU Sole

CR-010(2)

ESD Safety Shoes

Slip-on design, black
Static Dissipative or Conductive Sole
PVC or PU Sole

CR-010(3)

ESD Safety Shoes

Laced/ Velcro design, white
Static Dissipative or Conductive Sole
PVC or PU Sole

CR-012(3)

Cleanroom ESD Slippers/ Sandals

4-hole design, white
Commonly used in Assembly & Inspection Area
Surface resistivity: 10⁷ to 10¹⁰

CR-012(5)

Cleanroom ESD Slippers/ Sandals

ESD SPU Foaming, 4-hole design, white
Commonly used in Assembly & Inspection Area
Surface resistivity: 10⁶ to 10⁹

CR-012(6)

Cleanroom ESD Slippers/ Sandals

ESD SPU Foaming, blue
Commonly used in Assembly & Inspection Area
Surface resistivity: 10⁶ to 10⁹

CR-011(1)

Canvas Shoes

4-hole design, white
Soft comfortable fabric
Anti-static or normal PU/PVC sole

CR-011(2)

Canvas Shoes

Full cover, coloured sole, white
Soft comfortable fabric
Anti-static or normal PU/PVC sole

CR-011(3)

Canvas Shoes

Full cover, coloured sole, white
Soft comfortable fabric
Anti-static or normal PU/PVC sole

Cleanroom Consumables · 12 SKUs

Cleanroom disposables

Shoe covers, masks, bouffant caps, lab coats, Tyvek jumpsuits and aprons, sticky rollers and mats.

CR-013

Non-Woven Shoe Cover

Slip on with elastic top
Spun bonded non-woven material
Low lint and durable

CR-014(1)

PVC Shoe Cover

Slip on with elastic top
Use in General Assembly Area
Low cost

CR-014(2)

Washable Shoe Cover

Slip on with elastic top
Fabric Surface Resistivity 10⁶ to 10⁹
Washable and durable

CR-016

Disposable Face Mask

Spin bounded & Non-woven materials
Single ply paper low cost option, 2 ply and 3 ply construction
Easy to wear & comfortable. Low lint suitable for cleanroom & surgical use

CR-017

Disposable Bouffant Cap

Non-woven materials
Low lint suitable for cleanroom use
Available in Blue or White

CR-060

Lab Coat

Suitable for use in Laboratories
Available in disposal non-woven or washable material

CR-060(3)

PVC/Tyvek Apron

Protects from chemical spillage
Good chemical resistance
Available in PVC or Tyvek Material

CR-060(6)

Tyvek Jumpsuit

Disposal and suitable for use in cleanroom
Good chemical resistance
Light weight and comfortable

CR-060(7)

PVC/Tyvek Sleeve Protector

Protects from chemical spillage at armsleeves
Good chemical resistance
Available in PVC or Tyvek Material

CR-021

Cleanroom Non-Woven Adhesive Rolls

Removes Dust Particles in Cleanroom Rollers
Good Absorbency & Antistatic
Roll: 450,615,650mm(W)x1 Om, 12m(L)

CR-020

Cleanroom Sticky Roller

Portable dust & particle collector in clean room
LDPE with Acrylic adhesive
Colour: Blue, Grey, White

CR-015

Sticky Mat

Polyethylene film with low, medium or high tackiness adhesive on one side
30 peels per mat, 8 mats/per carton
Grey, Blue, White or Green

Cleanroom Consumables · 9 SKUs

Wipes, mops, swabs & finger cots

ESD polyester, micro-denier, ultra-clean, non-woven and PVA wipes, cleanroom mops, swabs, finger cots and stalls.

CR-022

ESD/Polyester Wipes

Class 1-10 compatible clean ESD wipers
Carbon fibers are knitted in stripe line
Laundered & packaged

CR-023

Micro-denier Wipes

Micro-filament provides better contact to surface
Laundered & packaged
Sealed edges prevent particle or lint generation

CR-024

Ultra Clean Wipes

Class 1-10 compatible clean wipers
Laundered & packaged in the class 10 cleanroom
Thermally sealed edges prevent particle or lint generation

CR-025

Non-woven Wipes

Dupont's propriety "Spunlace" technology
High absorption power with no residue on wiping surface
Size: 4" x 4" or 9" x 9"

CR-026

Cleanroom PVA Wipes

Sheet or Block type
High Absorption with good Chemical Resistance property
Soft, Reusable & Laundrable

CR-027

Cleanroom Mops

Lint free & Class 100 compatible
Available in flat or wet edge less type
Microfiber Polyester or PVA Sponge Material

CR-018

Foam / Cotton Swab

PP Handle - Conductive or Dissipative
Polyester or Cotton Head
Lint-free and Highly Absorbent

CR-028

Finger Cots

Antistatic and Powder free
Available in Normal White, Antistatic Pink or Yellow
Free from Ionic Contamination

CR-030

Finger Stall

Thick and Reusable
Finger textured or Smooth
Available in Orange Antistatic & Black Conductive

Cleanroom Consumables · 2 models

ESD foam & polyester swabs

Swabs of 100 ppi open-cell polyurethane foam, free of silicone, amides and DOP, on ESD-safe polypropylene handles.

Foam swabPolyester swab

Ace Star's Cleanroom ESD Foam Swab is constructed from compressed 100 ppi (Z) open-cell polyurethane foam that is free from organic contaminants such as silicone, amides and DOP. Foam material is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings.

Ace Star's Cleanroom ESD Polyester Swab is an excellent dissipative swab for cleaning very small grooved, slotted, recessed areas, or broad surfaces and flat areas. It's laundered, knitted polyester head is extremely clean.

Cleanroom Consumables · 12 SKUs

Cleanroom stationery

Cleanroom paper, notebooks and forms, document holders, ESD files, clipboards, dissipative plates and cleanroom pens.

CR-050

Cleanroom Notebook

Available in A4,A5,A6, A7 sizes
Spiral or Stapled binding
20,50 sheets

CR-051

Cleanroom Paper

Designed for writing, printing & photocopying in clean room
Lint-free & low extractable ions
Size: A4, A3 or customized

CR-052

Cleanroom Computer Forms

Designed for printing in cleanroom
Lint-free & low extractable ions

WS-007

Clear Document Card Case, Badge

Ideal for Documents, Instruction Manual, ID Badge and Assembly Drawings
Cleanroom compatible material available
Resistivity Range 10⁹ - 10¹¹ ohms/sq

WS-008

Static Dissipative Page Protector

Low cost with Ring Binding Holes
Soft & Flexible
As ESD Page Protector

WS-009

ESD Arch File

Cleanroom compatible
Resistivity Range 10⁹ - 10¹¹ ohms/sq
Available in 1", 2" or 3" File

WS-009(1)

Cleanroom ESD File

Cleanroom compatible
Resistivity Range 10⁴ - 10⁹ ohms/sq
Customised size & design available

CR-048

Cleanroom Clipboards

Made with ESD Safe Cleanroom materials
Cleanroom Class 100 compatible
Standard A4 Acrylic material

WS-006

Static Dissipative Plate

Permanent Static Dissipative Property and Chemical Resistance
Suitable as Cleanroom Materials Partitions, Equipment Covers Protection Chamber Walls, etc
Available in Acrylic, PVC and PC

WS-021

ESD Pen

Conductive Non Carbon Black PP
Suitable to use in General Assembly Line
Surface Resistivity: 10³ - 10⁹

WS-041(1)

Cleanroom Sharpie Pen

Metallic marker pen
Clean room compatible

WS-041(3)

Cleanroom Stainless Steel Pen

Stainless steel casing
Surface Resistivity: 10³ – 10⁶
Clean room compatible

ESD Packaging

Shielding bags, foams, trays, tubes and tapes that protect in transit.

ESD Packaging · 7 SKUs

Cleanroom & ESD bags

Antistatic, conductive, static-shielding and moisture-barrier bags, plus amide- and silicone-free cleanroom bags.

GP-001

AntiStatic/Conductive/Bubble Bags (Rolls)

LDPE
Meet ESD requirements of Mil-B-81705B
Surface Resistivity < 1012 ohms/sq

GP-002

AntiStatic Conductive/PEIPP/Nylon Bags (Rolls)

Clear Transparent or Pink/Blue antistatic
Zip lock or Bubble protect ion (optional)
LDPE/HDPE/ PP/ Nylon

GP-003

Clear Amide/Silicon FreeClass 100 Cleanroom Bag/Sheet

LDPE or HDPE
Free from additive of amide, DOP and silicon oil
Out gassing not detected

GP-004

Static Shielding Bag

Materials : Heat sealable, electrostatic protective, flexible barrier material
Free from additive of Amide, DOP and Silicon
Thickness : 3.1 Mils, 2.0 Mils and others

GP-005

Metalized Moisture Barrier Bag

Structure of static dissipative polyethylene and metalized polyester
Provide excellent moisture barrier. Maximum puncture resistance
Thickness 3.6 - 7.0 Mils. Static shielding < 20 volts (EIA 541)

GP-006

Nylon/ Foil Moisture Barrier Bag

4 - 7Mils of static dissipative nylon aluminium foil and static
dissipative polyethylene provide a very low MVTR.
Exceed the EMI/RFI/ Static shielding requirements of Mil-B-81705C Type I. Static shielding < 15 volts (EIA 541)

GP-008(I)&(II)

25 kgs Packaging Bag

For packing of 25kgs Engineering Plastic Resins
Superior Moisture Barrier Protection
Anti-slip property (optional)

ESD Packaging · 8 SKUs

Foams, trays & separators

Cleanroom PE, conductive and antistatic foams, injection-moulded and vacuum-formed trays, and Tyvek, paper and carbon separators.

GP-010

Cleanroom PE Packaging Foam

Extruded foam made of LDPE
Offers exceptional cushioning and antistatic properties
Low ion content, no carbon or metal particles, no flaking and noncorrosive. Foam convert in Cleanroom.

GP-011

Conductive PU/PE/EVA Foam

Excellent cushioning property
Available in various densities
Ideal for long term packaging of ESD Sensitive Devices

GP-012

AntiStatic PE/PU Foam

Improved packaging against shock and vibration
Suitable for lining shipping cartons
Protection from moisture and dust due to its closed cell structure.

GP-013

Injection Moulded Tray

Conductive/ Static Dissipative
PP, PE, ABS, PC Materials
Cleanroom compatible (optional)

GP-014

Vacuum Forming Tray

Conductive/ Static Dissipative
PP, PE, PVC , PET, PETG
Cleanroom compatible (optional)

GP-009(1)

Cleanroom Tyvek Separator

Static Dissipative
Excellent Tear Strength
Cleanroom compatible

GP-009(2)

Cleanroom Paper Separator

Static Dissipative
Non-woven Structure
Cleanroom compatible

GP-009(3)

Carbon Leaf Separator

Conductive Black
Excellent Tear Strength, Puncture Resistance & Clean Peel
Cleanroom compatible

ESD Packaging · 7 SKUs

IC shipping tubes & profiles

IC shipping tubes and stoppers, PP tubes, PE caps, plastic profiles and flexible tubes.

GP-017

Shipping Tube (IC Tube) Stopper

Material: PVC, PS, PETG, etc.
Design services available

GP-018

Stopper

Material: PVC, TPE, etc
As an end plug to be used to close the tube end.

GP-019

PP Tube

Material: Polypropylene
Use for Packing and profile.

GP-020

PE Cap

Material: Polyethylene
As an end cap to be used to close the end of the PP tube

GP-021

Plastic Profile

Material: PVC, ABS, PS, TPE, etc.
Customised design services available

GP-021(1)

Plastic Profile

Material: PVC, ABS, PS, TPE etc
Customised design services available

GP-022

Flexible Tube

Material: Soft PVC
As protection tubing in Cleanroom Class 100

ESD Packaging · 7 SKUs

Carrier tape, Stat-Rite®, silica & bands

SMD embossed carrier and cover tapes, Stat-Rite® dissipative alloys, silica gel with humidity cards, straps and ESD bands.

GP-015

SMD Embossed Carrier Tapes and Reels

Embossed carrier tapes for IC chips and other devices
Take-up Reel made from high impact injection molded materials
Reels available in normal, blue antistatic and conductive black

GP-016

Cover Tapes

Conductive/ Static Dissipative
PSA & heat sealable
Width: 5.3, 9.3, 13.3, 21.3, 25.5, 37.5, 49.5, 65.6 & 81.5mm

GP-023

Stat-Rite® M809

SR (ASTM 0·257): 109-1 010 Static Decay, s (CPM, 1 K·> 10K) : <2s
Application: Electronic assembly packaging, PCB tray packaging & electronic component packaging

GP-024

Stat-Rite® 5680/ M690

It is a static dissipative PETG alloy. Stat-Rite® lDP alloys provide clean, permanent ESD protection. Base resin: PETG
SR (ASTM D-257): 108·1010.Static Decay, s (CPM, 1 K->10K): <2s
Application: Packaging for Hard disk, medical device & electronic components

GP-007

Silica Gel and Humidity Card Indicator

Packaged in plastic, paper, heatlon paper, Tyvek paper, non-woven material, cloth bag and plastic bottle

WS-022

Conductive/ Static Dissipative PP Strap

To use with IC Tray Strapping Machine
High Temperature Resistance
Surface Resistivity 10⁴ - 10¹¹

WS-025

ESD Rubber Band

Ideal as Reusable Rubber Band in Assembly Line
Static Dissipative Pink 10⁹ to 10¹¹ & Black 10⁶ - 10⁹
Size: 6mm (W) x 80 or 100mm (Diameter)

Material Handling

Racks, bins and curtains that keep parts grounded between steps.

Material Handling · 7 SKUs

PCB & magazine racks

Conductive PCBA flat and L-shaped racks, plus conductive and ESD magazine racks.

MH-002(1)&(2)

Conductive PCBA Flat/ L-Shaped Rack

Surface Resistivity 10⁴ - 10⁶ ohms/sq
Flat rack size (mm): 175(W) x 390(L) x 25(H)
L-shaped rack size (mm): 207(W) x 274(L) x 93(H)

MH-007

Conductive PCB Magazine Rack

Moulded from Conductive PP & reinforce by Aluminium structure
Adjustable shelf space to accommodate different size board
High Heat resistant type available

MH-007(6)

ESD Magazine Rack

Store 50 pieces of PCB plates
PCB Plates: 330mm x (50-250)mm
Temperature 80C/120C

MH-007(7)

ESD Magazine Rack

Store 50 pieces of PCB plates
PCB Plates:350m x (50-250)mm
Temperature 80C/120C

MH-007(8)

ESD Magazine Rack

Store 50 pieces of PCB plates
PCB Plates:350m x (50-250)mm
Temperature 80C/120C

MH-007(9)

ESD Magazine Rack

Store 50 pieces of PCB plates
PCB Plates: 330mm x (50-250)mm
Temperature 80C/120C

MH-007(2)

ESD Magazine Rack

Store 50 pieces of PCB plates
PCB Plates: 460mm x (70-330)mm
Temperature 80C/120C

Material Handling · 8 SKUs

ESD boxes & bins

Conductive and dissipative hinge boxes, component boxes, circulation boxes and conductive waste bins.

MH-011

Conductive/ Static Dissipative Corrugated Box

Custom-made
Standard thickness of 3mm, 4mm or 5mm
Heat Pressed Double Folded Reinforced Sheet

MH-015(1)

Conductive Component Box

Contour Size: 130mm(L) x 125mm(W) x 65mm(H)
Interior Size:110mm x 105mm x 55mm

MH-015(2)

Conductive Component Box

Contour Size:160mm (L) x 98mm(W) x 70mm(H)
Interior Size:148mm(L) x 86mm(W) x 60mm(H)

MH-015(3)

Quantity-expressed Conductive Component Box

Contour Size: 253mm(L) x 140mm(W) x 70mm(H)
Interior Size:233mm(L) x 127mm(W) x 58mm(H)

MH-015(4)

Conductive Component Box

Contour Size:400mm(L) x 235mm(W) x 90mm(H)
Interior Size: 360mm(L) x 210mm(W) x 80mm(H)

MH-015(5)

Multi-usage Circulation Box

Contour Size:390mm(L) x 285mm(W) x 275mm(H)
Interior Size: 360mm(L) x 250mm(W) x 255mm(H)

MH-015(6)

Circulation Box

Contour Size:608mm(L) x508mm(W) x 205mm(H)
Interior Size: 570mm(L) x 470mm(W) x 201mm(H)

MH-015(7)

Conductive Waste Bin

Diameter 320 x 300mm(H)

Material Handling · 9 SKUs

Curtains, film, trays & shippers

Conductive honeycomb curtains, PET film that makes windows ESD-safe, conductive trays, shipping pallets and wafer shippers.

MH-009

Conductive ESD Honey-comb Curtain Strip

3 types available n transparent for good visibility; yellow absorbs harmful ultra violet rays & black opaque film
Flame retardancy
Surface Resistant: 10⁵ - 10⁸ ohms/sq on printed side:10⁹ - 10¹¹ ohms/sq on reverse side

MH-010

Static Dissipative/ Conductive Clear Film

Static Dissipative 10⁹ - 10¹¹
Conductive 10⁵ - 10⁸
Cleanroom compatible

MH-016(1)

Conductive Tray

Contour Size:460mm(L) x313mm(W) x 40mm(H)
Interior Size:420mm(L) x 293mm(W) x 29mm(H)
70 cavities:38mm x 38mm

MH-016(2)

Conductive Tray

Contour Size:450mm(L) x295mm(W) x 70mm(H)
Interior Size:435mm(L) x 280mm(W) x 62mm(H)

MH-016(3)

Conductive Tray

Contour Size:450mm(L) x295mm(W) x 70mm(H)
Interior Size:435mm(L) x 280mm(W) x 62mm(H)
12 cavities:125mm x 48mm x 15mm

MH-016(4)

Conductive Tray

Contour Size:450mm(L) x295mm(W) x 70mm(H)
Interior Size:435mm(L) x 280mm(W) x 62mm(H)
10 cavities:130mm x53mm x 15mm

MH-016(5)

ESD Tray

Contour Size:490mm(L) x381mm(W) x 35mm(H)
Interior Size:425mm(L) x 315mm(W) x 25mm(H)

MH-012

Conductive Shipping Pallets

Plastic injection moulded
Strong and Durable
Resistance Range 10⁴ - 10⁹

MH-017

Wafer Shipper

Packing box to ship wafer
Available in 4”, 5”, 6”, 8” sizes
You are here:

Workstation & Grounding

Mats, wrist straps, grounding cords, tapes and tools for the EPA bench.

Workstation & Grounding · 4 models

Vessel RoHS2 ESD mats

RoHS2-compliant table mats (LG-100 and SG-100, 10⁶–10⁷ Ω) and anti-fatigue mats (AF-90, AF-45) from Vessel of Japan, a century-old maker.

LG-100SG-100AF-90AF-45

With RoHS2 directive coming into effect on 22nd July 2019, we are glad to bring to Malaysia market, a high quality RoHS2 compliant ESD Table Mat at cost competitive price from Vessel Japan.

Vessel Co. Inc. is a very reputable company with 100 years of proven track record in supplying good quality products at competitive price in Japan. We assure you peace of mind with Vessel RoHS2 ESD Table Mat proven to be reliable and of good qualify.

Workstation & Grounding · 9 SKUs

ESD table & floor mats

Static-control, high-temperature, anti-fatigue, cleanroom, Compostat, Interstat, operator and conductive mats.

WS-010

Static Control Table Mat

2-layer rubber mat with thickness: 2mm
Static Dissipative on top layer and conductive on bottom
Suitable as Production Table Mat

WS-011

High Temperature Rubber Mat

Durable 2-layers rubber material
Top Color Dissipative 10⁶ -10⁹ ohms/sq
Bottom Black Conductive 10³ - 10⁵ ohms/sq

WS-012

Anti-Fatigue Mat

Brown or Black Dissipative (homogeneous material)
Ideal for lining metal shelving, rolling carts and floor
Provide a non-skid, non-abrasive, cushioning effect with protection from physical shock. Grey, Brown or Black

WS-013

Cleanroom Mat

Strong and Durable
Amide & Silicon free
Resistance to Ground < 10⁹

WS-014

Compostat Homogeneous Mat

Single Layer Homogeneous Material
Static Dissipative 10⁶ - 10⁹
Suitable as General Work Mat

WS-015

Interstat Mat

3-layer materials with Static Dissipative Vinyl Top, Conductive Middle Layer and Soft Cusiion Bottom Layer
Static Dissipative 10⁶ - 10⁹ ohms/sq
Colour : blue or grey. Thickness of 3mm

WS-016

POP Operator Mat

Static Dissipative Blue Homogeneous Mat
Suitable as Cleanroom and Workstation Mat
Reduce physical shock. Colour: Blue. Thickness of 6.5mm

WS-017

Black Conductive Mat

Flexible and Durable
Suitable as Table or Floor Mat
Conductive <= 10⁵ ohms/sq

WS-018

Conductive / Dissipative Laminate

Chemical & Sulphur Resistance
Permanently Static Dissipative
Surface resistivity 10⁶ to 10⁹ ohms/sq

Workstation & Grounding · 9 SKUs

Personal grounding & coatings

Wrist straps and coil cords, heel grounders, ground blocks and cords, conductive belts, cleaners and permanent dissipative coatings.

WS-001

Static Control Wrist Strap / Coil Cord

Wide selections with competitive price
Available in standard Elastic, Velcro or Metallic Band
Coiled wire length 10', 12', 15'

WS-002

Heel Grounder

Ideal for grounding mobile personnel
For proper grounding, use on both feet
Made with Conductive Rubber with Grounding Ribbon

WS-003

Dual Station Ground Block

Injection Moulded Block
Strong and Durable
Easy to install with Grounding Lug or Snap Button

WS-004

Common Point Ground Cord

Multiple Grounding Points
Use with Standard Banana Plug or Snap Button
Available in 6', 10' or 15'

WS-005

Grounding Cord for ESD Mats

Comes with 1 Meg ohm built-in resistor
Grounding point with either snap button or cable lug
Available in 6 ft. and 12 ft.

WS-020

Conductive Velcro Belt

For use of strapping of trays during transportation
Reusable Velcro with metal buckle
Conductive Carbon coated

WS-026

Mat & Table Top Cleaner

Removes surface dirt on chair mats or other anti-static mats
Eliminates unsightly film or other residue that may buildup on static sensitive areas
Maintains original surface resistivity of anti-static Mats

WS-027

Static Dissipative Permanent Coating Solution

Colourless paint can be applied to a variety of plastic surfaces to guard against static electricity
Allows static to dissipate across a surface even down to zero humidity
Safe to use, incl. cleanrooms

WS-028(2)

ESD Spray

Applied by spraying, wiping, dipping
Meets MIL-B-81705 and NFPA-56A electrostatic decay
Non-staining, completely biodegradable and safe to use

Workstation & Grounding · 1 models

Mobilon band

Clear, thin, RoHS-compliant TPU bands for bundling trays and cases. Stronger than natural rubber.

Mobilon

Made of 100% thermoplastic polyurethane elastomer, Mobilon Band has the following unique features :

• Superior elasticity and durability. • Clear (Transparent) and vividly colorful. • Conformed to RoHS Directive and the Japanese Food and Sanitation Law. • Far much thinner and stronger than the same size band of natural rubber. • Mobilon Band does not contain Sulfur. Normal Rubber Band contains Sulfur that cause corrosion to certain electronic parts.

Workstation & Grounding · 2 models

PU-coated gloves for the bench

The PU-coated nylon glove range for handling PCBs and components at the workstation.

AS-PUGCNAS-PUGWN

Ergonomic and Anti-fatique due to its Breathable, flexible and soft nylon texture

Elastic cuff allows users to wear PU Coated Nylon Glove in top fit condition (avoid “loose-wearing” gloves problem)

Workstation & Grounding · 4 SKUs

Cleanroom & ESD furniture

ESD cleanroom chairs, tables and cabinets, plus storage and transport trolleys.

WS-019

ESD Cleanroom Chair

Ergonomically designed for comfort
Adjustable height. Conductive Black Plastic or Metal Castors
Chair Covered Materials Resistivity 10⁶ - 10⁹ ohms/sq

WS-051(3)

ESD Cleanroom Table

Metal finishes :stainless steel, chrome-plated
Customised design available

WS-051(2)

ESD Cleanroom Cabinet

Metal finishes : stainless steel, chrome-plated
Customised design available

WS-008(2)

Provide Storage & Transportation solutions

Metal finishes : zinc-plated, chrome-plated
Width (mm) : 455,530,610
Length (mm) : 910, 1220, 1525

Workstation & Grounding · 9 SKUs

ESD & cleanroom tapes

Floor-marking, conductive grid, printed antistatic, shielding, Kapton, copper and cleanroom tapes.

WS-029

Caution Floor Marking Tapes

Bright yellow colour with ESD Caution logo
Single colors: Red, Green, Yellow or Blue
Ideal as markings for ESD Control Area

WS-030

Brown Conductive Grid Tape

Heavy duty co-polymer antistatic layers with buried conductive grid provides effective static shielding property
Surface resistivity : 10⁴ to 10⁵ ohms/sq
Size: 12mm, 18mm, 24mm(W) x 36m(L)

WS-031

Clear Antistatic Tape Printed with ESD Symbol

Printed with ESD SYMBOLS and "Anti-Static Tape”
Static decay rate of MIL-B-81705C
Available in 72 yards (66m) long & 3" paper/plastic Core

WS-032

Clear / Antistatic Red Tape

For general application in static free workstations
Decay rate of MIL-B-81705
Available in 72 Yards (66 Meters) & 3” Core

WS-033

Static Shielding Utility Tape

Metalised polyester film with Anti-Static Coating
Clear with Acrylic Adhesive
Good Static Decay Rate

WS-043

Cleanroom Tape

Non-residuing cellophane tape
Multiple colours available
Tape width available in 12mm, 18mm, 24mm, 48mm

WS-035

High Temperature Kapton Tape

Eelectrical grade Polyamide Kapton® with pre-cured pressure sensitive silicone adhesive film
Designed to operate at elevated temperatures higher than Polyester

WS-039

Copper Tape

ESD grounding purpose
Suitable for conductive flooring installation
Tape width available in 8, 10, 12, 18, 24, 48mm

WS-030(2)

Cleanroom Conductive Tape

Non-residuing polyester film with conductive adhesive
Surface resistivity 10⁴ to 10⁶

Workstation & Grounding · 9 SKUs

ESD tools & bench equipment

Cleanroom brushes, tweezers, solvent dispensers, vacuum pick-ups, lead-free soldering stations, smoke absorbers and magnifiers.

WS-023

ESD Cleanroom Brush

Ideal as Cleaning Tool in ESD work area
Available in Plastic, Plywood or Metal handle
Horsehair or Metal Bristle

WS-024

Tweezers

Handcrafted to perfect tip symmetry and balance, polished edges, superior no-scratch/anti-glare stain finishing
Available in different lengths, thickness and angles
Available in ESD safe plastic or stainless steel

WS-044

ESD Solvent Dispenser

Anti-static PE bottle with stainless steel pump cap
Surface resistivity: 10⁸ -10¹¹
Volume: 40, 180 ml

CR-049

Cleanroom Vacuum Pick Up Tools

Hand operated vacuum suction tool
Available in various design & sizes
Resistivity 10⁶ - 10⁹ ohms/sq

EQ-038

ESD Vacuum Pick-Up

Pick up tiny SMD components
Suction force of up to 120g
Built-in air pump

EQ-037

ESD Leadfree Soldering Station

Designed with automatic heat output control adapted to various soldering tip sizes
Fast temperature compensation response is key to solving temperature fluctuation problems in many lead-free soldering work

EQ-048

ESD Solder Sucker

ESD safe housing and tip
Light weight
Ideal for circuit board repairs

EQ-040

ESD Smoke Absorber

Remove noxious fumes quickly, safely and effectively
Replaceable filter made of special urethane material embedded with refined and activated carbon
Available in regular and ESD safe type

EQ-039

Magnifying Lamp

Better view and inspect micro/mini components
Tool for visual inspection of PCB densely mounted with micro components

Nothing matches that search. Try a code like “CR-034” or a word like “tray”. Or ask us directly.

Can't find it?

The catalogue is the start, not the limit.

Ace Star manufactures locally and sources globally. Garments can be tailor-made, trays and foams cut to your parts, and testers built to your gate.

Describe what you need